Introduction
While discussing the plan of the inventory situation, I would like to touch on some primary issues of the subject of discussion. Thus, in my opinion, the most important task is considered to be the principal goal defining. I suppose that understanding of the key factors, which influence the defined item production, is of primary importance. For this reason, I want to point out that the most important steps, which the goal includes, are considered to be production of the item materials, transportation of the product, the product fabrication and postconsumer disposal of the product. These steps are the major issues, I want to draw your attention to.
Main Body
While speaking about the improvement of the inventory situation, one should draw his/her attention to the characterization of raw material. The inventor’s most important task is to utilize post-consumer polyethylene terephthalate (PET) plastic as the primary raw material. Generally, there are a lot of ways to increase the quality of the product. For instance, the inventor is to understand water treatment technology, clean water rinsing processes, etc. To improve the inventory situation, the specialist should remove low-density polymers and maintain intrinsic viscosity and decontamination of the material. On the other hand, he/she is to know numerous material defects that accumulate in the polymeric material. Chemical and physical laboratory analysis of raw material is also to be taken into account.
Increasing of COOH end-groups, reduction in filterability, decrease in color L, increasing of oligomer content, decreasing of crystallization temperature, decreasing of the mechanical properties, broadening of molecular weight distribution, decreasing of dynamic viscosity, increasing of acetaldehyde, decreasing of extractable foreign contaminants, increasing of haze, increasing of color number b are the issues the inventors must take into account while producing the plastic bricks.
The recycling of PET-bottles is considered to be an industrial standard process, which numerous engineering companies are to offer. The re-pelletizing way is also to be taken into account. Although the methodology causes thermal destruction, it has a lot of advantages, including intensive melt filtration, intermediate quality control, modification by additives, product selection, processing flexibility increasing and quality uniformization.
Further processing is related to the production of the following materials: A-PET film for thermoforming, BoPET packaging film, carpet yarn, engineering plastic, filaments, non-woven, packaging stripes, staple fibre and addition to PET virgin production.
As far as PET is recognized to be an excellent barrier component, a lot of products can be made from the material. If people (the consumers) are sure of the product safety, the inventory situation will be also improved. Thus, to attract public attention, the producers can explain that “according to the American Chemistry Council, PET has been approved as safe by the FDA and the International Life Sciences Institute (ILSI). In 1994, ILSI stated that PET polymer has a long history of safe consumer use, which is supported by human experience and numerous toxicity studies. The American Chemistry Council cautions that products made with PET be used only as indicated by the manufacturer.” (What is Polyethylene Terephthalate, 2011)
Conclusion
So, the inventory situation depends upon the operations, which are performed to produce the items. Thus, the most important issues are considered to be chemical and physical laboratory analysis, an industrial standard process and understanding treatment technologies. Public attention attraction is also one of the key elements to succeed.
Reference List
What is Polyethylene Terephthalate. (2011). Web.