Construction Essay Examples and Topics
The significance of the fire safety issue in buildings under construction can be also seen through the financial losses incurred by such incidents. The fire safety issues that might be involved in buildings under construction [...]
Furthermore, the ranking is the other problem that usually causes the roof spread and it is the problem of the case.
This is one of Everglades' deepest and regarded as the most important passageway The restoration of Everglades is expected to be achieved through the returning historic sheet water flow through the parched Everglades National Park [...]
Floor area ratio refers to the total sum area of the buildings on a specific region to the size of the land of that region.
Before the opening of the new Scottish Parliament Building, the General Assembly Hall of the Church of Scotland accommodates the debating chamber and committee rooms of the Scottish Parliament.
Below are the descriptions of these types of organizations: In this category the contractors are referred to as general contractors and these will generally build residential, industrial, commercial, and other related buildings in the industry.
Off student, housing has become a pressing need as more and more students join college and the campus housing is insufficient to house the students.
Environmental degradation is causing a lot of harm to the buildings being constructed in the current era, and there is a dire need of involving a hazard alleviation sector while undergoing a developmental project.
Many procedures should be followed from the time the construction of the foundation of the house starts till the completion of the house.
They are now made for offices, and also as hotels and malls, and to bring modernization to the city of the country.
These catastrophes delayed the quick completion of the bridge despite many Americans being optimistic and determined to complete the construction of the bridge.
Thus, one can note that the Tsuruoka Cultural Hall is a project in which the architects have managed to achieve the concept of combining traditional and modern architecture step by step.
The fact is that the complexity of the project comes from the high number of factors that should be taken into account with the primary purpose of achieving success and guaranty the in-time accomplishment of [...]
The materials and labor source that is used in the project conforms to the Abu Dhabi construction requirements called the common building code of the UAE.
It was designed in the year 1925. It was designed in German for the University of Strasbourg.
ETFE is a fluoropolymer initially developed for the aerospace industry in the 1940s and eventually adopted for use in greenhouse construction due to its superiority over the glass.
It further compares the structure of the buildings created in the past and present. The paper analyzes the problem in tall buildings and then discusses the rectification of those problems.
The development of the construction industry has widened the scope of the projects and by maintaining the overall profits for the country.
Wood is the material that is used to build constructions during the centuries because of the possibility to handle wood in many ways to receive the definite qualities of the material.
The article looks at the origin, as well as highlights the journey that the balloon frame has undergone over the centuries. According to the author, the current construction technique was coined "the balloon frame" in [...]
Another key feature of the design of the cooling system is that the lamellas made of processed wood on the western part of the building protect the premises from the sun during the day, while [...]
The assessment of the economic feasibility of the robotization of individual construction processes is based on cost analysis and the calculation of payback.
The construction of the stadium is ordered by the government, and the estimated time of completion is August 2018. The project is expected to end with a grand opening of the stadium.
The main goals of this paper are to analyze the current real estate market and identify the main professional bodies associated with the built environment in the UK. In the 1990s, it turned into the [...]
When it comes to the United Kingdom in general and London in particular, it is necessary to highlight that, due to the high degree of economic development of the country, some numerous institutions and associations [...]
However, from a project management perspective, completing Wembley Stadium outside the allocated time and monetary resources amounted to failure of the project.
The vital significance of procurement in the success of any project necessitate for deliberate measures and consideration in the selection of the most appropriate procurement method.
The goal of the project is to outline the use of Building Information Modeling in the construction industry and to identify the benefits expected in the case of Dubai Municipality.
There are two major factors that are considered when designing a crane: the first consideration is the weight the crane is expected to lift, and the second consideration is the crane stability.
To ensure the stability of the progress in the use of simulation for construction purposes, it is necessary to perform a constant evaluation and assessment of the work that has already been done.
This process is commonly referred to as microplanning because all details are determined based on the peculiarities of the project and resources needed for completing it.
Waste production is reduced with the use of 3-D printers. 3-D printing defies the use of traditional forms of construction.
However, it is important to assess the display and design of the dashboard and to present the impacts of the systems on the driver.
The literature revealed the magnitude of the project and the various districts and precincts that have occupied the 400 hectares island.
In this paper, analysis of the factors that affect the Australian contractors have been done and more specifically in the Emirates.
One of the tools that can assist in improving the overall performance of the construction industry is the visualisation of projects.
The construction project is the basis of project scheduling and cost control. The project will increase the product portfolio of the company.
The development of project scope management seems to be the most important combination of actions and ideas to create a product; this element plays a crucial role in understanding the subject and the peculiarities of [...]
The decision to fall back on this type of construction is very often motivated by the need to meet the strict deadline for erecting buildings, as modular construction is known for high quality that can [...]
Additionally, the idea of the mystery of the construction process revolves around the fact that the technologies of the ancient Egyptians do not equal the architectural designs of the pyramids.
Since carbon fiber is much more durable than the rest of the materials suggested as the basis for making boxes, it should be selected as the key raw substance for creating boxes for the company [...]
In this view, the proposed solution to improve ventilation in stables is the incorporation of the dust sensor, Sharp Dust Sensor, into the air conditioner. The sensor automatically regulates the ventilation rate of the air [...]
Some of the factors considered in product design and engineering include the use of the product, the target markets, and the durability of the same product.
An overview of rubber-modified ERs with respect to their mechanical properties and the amount of hardener led to a collection of data as shown in tables 3.1, 3.
In conclusion, the presented design of the backpack creates a number of benefits for travelers because all of the functions are indispensible to starting a good trip for a long distance.
The first type of furniture available in the living room is a two seat couch, which is placed on the right side of the living room in close proximity to the balcony.
This idea enables users to understand information the project presents when the animation leads them to the end of the page.
To support this, I state that if I asked the following question to informants, "can you narrate to me the experiences of technology in your homes or your personal lives?" then I am likely to [...]
The design will be based on the demands and the wishes of the clients or customers because the product will only be successful if the customer is satisfied.
Some of these materials are nano-structured materials, smart materials as well as spin off materials mainly used in the aerospace industry and renewable materials that are expected to provide an alternative to materials of fossil [...]
The design elements are usually divided into three important areas: one is the exterior design, which involves the design in the proportion, shape and how the texture of the surface of the vehicle will look [...]
For a beginner, it could be a piece of work that is done and then forgotten, placed on a shelf and not attempted to re-create again, unless a sincere interest arises in this type of [...]
In addition, iRobot contains a wall feeler, which is located on the right area of the fender and makes iRobot travel adjacent to walls and around gadgets without touching them. Irobot fits into consumer engineering [...]
The unique feature of designer toys is that they have re-defined the meaning of 'toy' as such and appear to have combined toys with the notions of art and design.
The report looks at innovative approaches to challenging constraints experienced both in the design and implementation of the ship yard on the physical location of the facility.